Maintenance (Pic. 6); Environment - eta 002899040 Bedienungsanleitung

GB
– The correct function of the appliance is guaranteed only if you use the vacuum-packing
boxes/bags supplied by the manufacturer. Request it from your distributor.
– When removing food from the vacuum-packing box, make sure to release the vacuum
first by pressing down the valve W4 in the middle of the cover (pic. 5).
– The box (but not the lid) can be used in the microwave; do not use the box or lid in an
oven.
Application
Place ingredients to the vacuum-packing box/bag and close tightly. Connect one end of
the extraction hose W2 to the port for extraction W1 and put the other wide and rounded
end on the to the air extracting port of the box W3 or compatible bag (pic. 3). Plug the
power cord into a socket. Switch the appliance on by turning the speed control to level
MAX. When this function has been activated, the round adapter will be sucked tight. When
switched off, remove the hose (from the vacuum-packing box first). After processing,
switch the power unit off by turning the knob to 0/OFF position.
Setting the vacuum-packing intensity
During vacuuming, the vacuum intensity is set to „normal" mode. If you need to increase
the vacuum to „maximum", then briefly place your thumb or finger on the opening of the
hose end when vacuuming (pic. 4). The increased noise level of the vacuum pump (i.e.
the characteristic „knocking") signals that the maximum vacuum level in the box has been
reached. If this situation occurs, stop vacuuming immediately turn off the appliance.
IV. MAINTENANCE (pic. 6)
Do not use abrasive and aggressive cleaning agents! After use, wipe the vacuum
pump with a clean cloth. Do not immerse in water and do not wash it in a dishwasher
(avoid water getting in the internal components)! Take care that the binding surfaces
and the sealing elements are functional. Never dry plastic moulded parts above a heat
source (e.g. fire stove, electric/gas stove). Store the appliance thoroughly cleaned in a
dry, dust-free location that is out of reach of children and incapacitated persons.
VACUUM-PACKING BOX
Rinse the vacuum-packing box and parts thereof with water and detergent (or wash them
in a dish-washer). Allow all the parts to dry out properly before next use or storage.
BAGS
Before reusing a bag, we recommend properly washing it in warm water with a small
amount of dishwasher detergent, and rinsing in clear water. Place the bag so that water
can flow out from inside the bag. Before reusing, dry the bag thoroughly.
V. ENVIRONMENT
If the dimensions allow, there are marks of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specifi ed on
the product or in the accompanying documentation mean that the used electrical or electronic
products must not be disposed of together with municipal waste.
Attention
14 / 27