Safety Precautions - PeakTech 4350 Bedienungsanleitung

All manuals and user guides at all-guides.com

1. Safety Precautions

This product complies with the requirements of the following
European Community Directives: 2014/30/EU (Electromagnetic
Compatibility) and 2014/35/EU (Low Voltage) as amended by
2014/32/EC (CE-Marking).
pollution degree 2.
CAT I: For signal level, telecommunication, electronic with
small transient over voltage
CAT II: For local level, appliances, main wall outlets, portable
equipment
CAT III: Distribution level, fixed installation, with smaller transient
overvoltages than CAT IV.
CAT IV: Units and installations, which are supplied overhead
lines, which are stand in a risk of persuade of a
lightning,
overvoltage-diverter, current use counter.
To ensure safe operation of the equipment and eliminate the
danger of serious injury due to short-circuits (arcing), the following
safety precautions must be observed.
Damages resulting from failure to observe these safety
precautions are exempt from any legal claims whatever.
General:

Read these operating instructions carefully and make them
available to subsequent users.

It is essential to observe the warning notices on the device,
do not cover or remove them.

Pay attention to the use of the multimeter and only use it in
the suitable overvoltage category.

Familiarize yourself with the functions of the measuring
device and its accessories before you carry out the first
measurement.

Do not operate the measuring device unsupervised or only
protected against unauthorized access.
Overvoltage category III 600V;
i.e. main-switches
23
on current input,