Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Safety precautions
This product complies with the requirements of the following
directives of the European Union for CE conformity: 2014/30/EU
(electromagnetic
2011/65/EU (RoHS).
Overvoltage category II 600 V; pollution degree 2.
CAT I: For signal level, telecommunication, electronic with small
transient overvoltage
CAT II: For local level, appliances, main wall outlets, portable
equipment
CAT III: Distribution level, fixed installation, with smaller transient
overvoltages than CAT IV.
CAT IV: Units and installations, which are supplied overhead lines,
which are stand in a risk of persuade of a lightning, i.e. main-
switches on current input, overvoltage-diverter, current use
counter.
To ensure safe operation of the equipment and eliminate the danger
of serious injury due to short-circuits (arcing), the following safety
precautions must be observed. Damages resulting from failure to
observe these safety precautions are exempt from any legal claims
whatever.
*
Do not subject the equipment to direct sunlight, extreme
temperatures, extreme humidity or dampness
*
Do not operate the equipment near strong magnetic fields
(motors, transformers etc.)
*
Do
not
vibrations
*
Keep
hot
equipment
*
Allow the equipment to stabilise at room temperature before
taking up measurement (important for exact measurement)
*
Do not modify the equipment in any way
*
Opening the equipment and service- and repair work must only
be performed by qualified service personnel
Measuring devices don't belong to children hands
*
compatibility),
subject
the
soldering
2014/35/EU
equipment
to
iron
or
guns
-11-
(low
voltage),
shocks
or
away
from
strong
the
Werbung
Inhaltsverzeichnis
