Maintenance And Cleaning - Imetec Q2301 Bedienungsanleitung

USE
• Wash, dry and untangle your hair.
• Run the brush through your hair as you would a traditional brush,
starting from the roots and moving towards the ends, first with
EN
the heated bristle plate (1) facing towards you, and then with the
bristles facing outwards.
• For best results we recommend:
• Dividing your hair into sections and working lock by lock.
• Holding each lock taut, gripping it with one hand near the ends.
• Passing the heated bristle plate (1) all the way through the lock
of hair.
• Running the brush from the roots to the ends, first with the
heated bristle plate (1) facing towards you, and then with the
bristles facing outwards.
• To style the ends, turn the brush 180° inwards or outwards
(depending on the desired effect), making sure they come into
full contact with the heated sides (2).
• Once you have finished styling your hair, turn the appliance off
by pressing the on/off button (6) and unplug the brush from the
socket.
NOTE: It is normal for steam to develop when you
are using the brush; this is caused by the evaporation of
excess moisture in the hair.
NOTE: The appliance is equipped with an ioniser (9) that
turns on automatically when the appliance is switched on.
o n .

MAINTENANCE AND CLEANING

• Turn the appliance off and unplug it, then wait until the heated
plate (1) has cooled down.
• Clean the surfaces of the brush using a soft, damp cloth.
WARNING!
the appliance from the socket
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
Always
14
disconnect