• Take a thin lock of hair between your fingers, the same width as the
brush.
• Wrap the lock of hair around the brush no more than twice.
• Switch the hair dryer brush ON to the maximum temperature.
EN
• Wait for the lock to dry as desired before releasing it from the brush.
• To facilitate releasing the lock of hair from the brush, rotate button
(7a) to the right.
USE
Set the air flow and temperature to the following levels with the (2) button:
0 = OFF
1= Medium air flow and Medium temperature
2= High air flow and high temperature
o n .
Cleaning the appliance and accessories
Clean the appliance and the accessories with a damp cloth, when
necessary. Do not use solvents or other aggressive or abrasive
detergents. Otherwise, the surface could be damaged. Check the
intake filter (4) of the appliance regularly and remove all hair and
dust.
hair dryer is used, the more often the filter must be cleaned.
3854_G5901_.indd 14
3854_G5901_.indd 14
MAINTENANCE AND CLEANING
WARNING!
the appliance from the mains
before cleaning or performing
maintenance.
WARNING! Make sure all cleaned parts
are completely dry before reusing the
appliance.
NOTE: the more dust is present in the place where the
WARNING! Risk of fire. Wait for the
appliance to cool completely before
storing it.
WARNING! DO NOT wrap the supply
cord around the appliance.
Always
STORAGE
14
disconnect
03/02/21 15
03/02/21 15