Useful Tips; Preparing Your Hair - Imetec Q2301 Bedienungsanleitung

WARNING! DO NOT use this appliance
near bathtubs, showers, basins or
other vessels containing water. Never
place the appliance into water.
WARNING! Risk of fire. DO NOT use
flammable products on hair or on the
appliance.

USEFUL TIPS

By quickly learning how to use the hair brush, you will be able to
determine the exact application time needed to achieve the desired
effect.
• Make sure that your hair is clean and dry, and does not contain
any hairspray, mousse or gel residue.
• Brush your hair, making sure to remove any knots.
• When using the brush and during heating and cooling, place it on
a smooth, heat-resistant surface.
• When curling your hair, take care not to place the brush too close
to sensitive areas on your face, ears, neck or skin.
• When you have finished, wait for the brush to cool completely
before putting it away.

PREPARING YOUR HAIR

• Wash your hair as you would normally and brush it, untangling
any knots.
• Dry your hair and brush it from the roots to the ends.
INSTRUCTIONS FOR USE
• Connect the power cable (7) to the mains power supply.
• Press the on/off button (6) to turn the brush on.
• Select the desired temperature by pressing the "-/+" temperature
adjustment button (5). The temperature can be changed at any
time (between 160 °C and 210 °C) by pressing the "+" or "-"
buttons (5).
• After having selected the desired temperature, the button lock can
be activated by pressing and holding the "-" button (5) for a few
seconds. This function prevents temperature from being changed
accidentally when the brush is being used. The key-shaped
warning light (8) will appear on the display to show that the button
lock has been activated. To deactivate the lock, press and hold
the "-" button (5) again for a few seconds.
• The LCD display (8) will flash until the heated bristle plate (1)
reaches the set temperature. When the temperature is reached,
the LCD display (8) will remain lit.
13
EN