Approved Power Unit - Makita PF400MP Originalbetriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Capacities *1
Capacities *2
Capacities *3
Maximum water temperature
Overall length
Net weight
*1. Capacities of pump attachment in conjunction with DUX60 Cordless Multi Function Power Head
*2. Capacities of pump attachment in conjunction with DUX18 Cordless Multi Function Power Head
*3. Capacities of pump attachment in conjunction with UX01G Cordless Multi Function Power Head
*4. The value for maximum flow rate is the value when the lift height is 0 m.
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.

Approved power unit

This attachment is approved to use only with the follow-
ing power unit(s):
• DUX60 Cordless multi function power head
• DUX18 Cordless multi function power head
• UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
NOTE: In European countries (including UK and
Russia), Australia, New Zealand, Korea, China, South
Africa etc. which have EMI (electromagnetic interfer-
ence) regulation, this attachment cannot be used with
UX01G which serial number is smaller number than
30291 ending with Y. If the serial number of UX01G
matches any of the following conditions, it can be
used with this attachment in those countries as well:
• 30291Y or larger number than 30291 ending with Y
• Any number ending with alphabet suffix other than Y
* The serial No. is indicated on the battery terminal as
illustrated. The design of the label can be different.
► Fig.1: 1. Serial number
Maximum lift height (High speed)
Maximum lift height (Medium speed)
Maximum lift height (Low speed)
Maximum flow rate (High speed)
Maximum flow rate (Medium speed)
Maximum flow rate (Low speed)
Maximum lift height (High speed)
Maximum lift height (Low speed)
Maximum flow rate (High speed)
Maximum flow rate (Low speed)
Maximum lift height (High speed)
Maximum lift height (Medium speed)
Maximum lift height (Low speed)
Maximum flow rate (High speed)
Maximum flow rate (Medium speed)
Maximum flow rate (Low speed)
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not use for potable water.
Maximum water temperature is 40°C.
6 ENGLISH
PF400MP
14.0 m
11.0 m
6.0 m
145 l/min
140 l/min
95 l/min
11.0 m
8.0 m
120 l/min
100 l/min
15.0 m
11.0 m
6.0 m
150 l/min
140 l/min
95 l/min
40 °C
725 mm
1.0 kg