Meec tools 022732 Bedienungsanleitung Seite 12

EN
• Wear safety glasses or a visor.
• Wear safety gloves to protect your skin
from repeated and prolonged exposure
to the fluids being handled.
IMPORTANT:
• Only pump fluids that are compatible
with the material in the pump.
• Never pump unfiltered fluids.
• Check that the product has not been
damaged during transport or storage.
Check that the inlet and outlet openings
are free from any residual packaging
and impurities.
• Do not allow the product to run dry.
Put the end of the suction tube in the
fluid before starting the product.
• Do not use the product for thinner or
solvent.
• Do not use the product for strong
solvents or corrosive chemicals, such as
acetone, benzene, cresol, ethanol,
phenol, 1-methylethyl, concentrated
sodium hydroxide, nitric acid,
hydrochloric acid, sulphuric acid.
• Keep the hose away from heat, oil and
sharp edges. Check the hose for wear
and damage, and check that all
connections are correctly installed and
tightened.
• Do not use the product for hot water.
• Only use the product in a cool and well
ventilated environment.
• Do not turn the product upside down
after use.
MAINTENANCE
• Remove the batteries when the product is
not in use.
• Wipe the outlet hose clean every week.
12