Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Technical Data - Meec tools 022732 Bedienungsanleitung

Batteriebetriebene kraftstoffpumpe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 13

SAFETY INSTRUCTIONS

Follow the applicable health and safety
regulations as well as good workshop
practice.
Check the product regularly and replace
damaged and/or worn parts.
Only use original spare parts. The use of
other parts can result in personal injury
and/or material damage. It will also
invalidate the warranty.
Keep the product clean and in good
condition for best functionality and safety.
Use the product only for its intended
purpose.
Do not subject the product to knocks and
blows, or to careless handling.
Do not carry the product by the hose.
Never use the product if it is damaged or
not working properly, or if parts are
missing.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Battery
Hose length
Flow
Size
DESCRIPTION
Battery-powered fuel pump for diesel, paraffin,
light oils, DEF (AdBlue), water, anti-freeze,
wiper fluid, mild detergent and agricultural
2x LR20
38.5 cm
10 l/min
H58.4 x Ø3.2 cm
chemicals. Ideal for refuelling small boats and
transferring small volumes of fluid between
containers in garages and small workshops.
Fitted with hanger. Batteries are sold separately
in Jula department stores and at www.jula.
com.
1.
Power switch (knob)
2.
Battery holder
3.
Suction tube
4.
Suction hose
FIG. 1
INSTALLATION
1.
Release the battery holder (2) by turning
it anticlockwise (A).
FIG. 2
2.
Insert the batteries with the correct
polarity. (Do not mix different types
of batteries, or batteries with different
capacities or charging levels.)
FIG. 3
3.
Replace the battery holder (2) and screw
on.
USE
1.
Put the suction tube (3) inlet under the
surface of the fluid in the container from
which pumping is to take place.
2.
Put the outlet hose (4) in the opening of
the container to be filled.
3.
Start the motor with the power switch
(1) and hold the outlet hose (4) in the
container to be filled. Switch off the pump
before the container overflows.
4.
Put the outlet hose (4) in the holder.
WARNING!
The use of damaged and/or unsuitable
accessories can result in a risk of
personal injury and/or material
damage.
EN
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis