Venicci TINUM SE 2.0 Bedienungsanleitung Seite 16

Verfügbare Sprachen

IMPORTANT!

Before use, read the following manual carefully and keep it. The safety of the child may

be compromised if the recommendations included in this manual are not followed.

The manufacturer of the pram is not responsible for effects from not following notes,

warnings and recommendations included in the product documentation.

After purchased, ensure you correctly maintain all the components specified by the

manufacturer inthis manual guide. This pram requires regular maintanance by the

user. It is the user's responbility to undertake routine inspectio and maintance of the

pram in order to avoid damage of the product and/or injury to your child.

Backrest adjustment in the stroller version.The stroller seat is equipped with an

adjustable backrest. To lower the backrest to half-sitting or to the lying position, pull

the handle in the back part of the backrest upwards, select the required position

and release the handle. The backrest is equipped with a springloaded auto-lock

mechanism that does not require the handle to be lifted when lifting the backrest

from lying to sitting position. Every time you change the position of the backrest

check whether thefastening system is working correctly and adjust the harness

settings accordingly to fit your baby's new position.

Do not allow the child to stand on the seat as it may damage the stability of the

stroller and cause the stroller to fall down. In order to increase the stability of the

product while in use, make sure that the baby is positioned in the central part of the

carrycot or the seat unit.

Do not carry the pram holding the hood, upper edge of the backrest, footrest or

the element creating the pram version. Do not use the pram on steps or leave the

pram with the child on uneven surfaces (even with the brake on) as it may go down.

Carrying the pram up or down the steps, placing the pram to the bus, etc. should be

carried out with the aid of another person. The person holding the pram handle tube

passes the obstacle first while holding the pram handle tube, and he person holding

the other end of the pram should grasp the pram by a stable element such as a fixed

upright of the frame. When carrying the pram downstairs the person who is helping

comes down first.

Pram handle height adjustment. To change the height of the pram handle, press and

hold button, select the required height and release both button. After adjusting the

heightof the handle, hold it in the upper part and move it twice up and down to make

sure the locks function correctly.

In the case of prams equipped with transferable handle tubes, ensure that the child's

hands are notoutside the internal outline of the seat when changing the handle tube

position. After each change ofthe handle tube position, check the effectiveness of

the self fastening locking mechanism by pullingthe handle tube up and down several

times.

When changing the position of the backrest or the bassinet, pay attention to child's

hands and head.Footrest adjustment. The pram is equipped with adjustable footrest.

To lower the footrest press the adjustment buttons on both sides of the footrest,

adjust the footrest position and release the buttons.The footrest is equipped with

an auto-lock system that does not require the buttons to be releasedwhen lifting

the footrest.