Software Update; Factory Settings; Cleaning - AudioAffairs CCX 010 Bedienungsanleitung

2.1 Sound System

12. SOFTWARE UPDATE

When the device is connected to a WLAN and new software is available, this will be
downloaded and installed automatically.
- During the update, the LED will flash orange (double flashes).
- After the update is complete, the device will automatically restart.

13. FACTORY SETTINGS

In the event of malfunction, or in order to delete the old network settings, you can re-
set the device to factory settings.
1. While the 2.1 Sound System is switched on, press the RESET button on the back
for approx. 5 seconds, until the LED flashes red.
2. The device will start with the start process, like the first time you switched it on.
NOTE: after resetting to factory settings, the connections for Chromecast and Blue-
tooth need to be set up all over again.

14. CLEANING

DANGER! Disconnect the device from the power supply before cleaning. En-
sure that no liquid gets into the device.
CAUTION: solvents, alcohol, thinning agents etc. must never be used, as these can
damage the surface of the device.
Do not use any corrosive or abrasive cleaning agents. These could damage the surface
of the device.
Casing
Clean the casing with a damp cloth.
CUSTOMER SERVICE
00800 - 456 22 000
Software update
www.gt-support.de
61