Connecting External Devices; Hdmi Arc Connection - AudioAffairs CCX 010 Bedienungsanleitung

Connecting external devices

7. CONNECTING EXTERNAL DEVICES
WARNING!
• Turn down the volume on the devices before you connect them to one another.
• Switch off all devices before you connect them to one another, and comply with
the instructions for the devices that you wish to connect.
7.1

HDMI ARC CONNECTION

HDMI (ARC)
ARC stands for "Audio Return Channel" and means that audio signals can be transmit-
ted in both directions. A device equipped with HDMI (ARC) can both receive and trans-
mit audio signals.
HDMI (CEC)
CEC stands for "Consumer Electronics Control". If two or more CEC devices are connect-
ed to one another, then at least the basic functions such as switching on and off can be
operated via a remote control.
Example: the 2.1 Sound System is connected via a CEC enabled HDMI cable to a CEC
enabled television. If the television is now switched on with the television remote con-
trol, the 2.1 Sound System will also switch on. (However, the television must send and
receive a signal. If, for example, the television is receiving the television signal via a set
top box, this must also be switched on.)
In order to be able to use the ARC function, external devices that are connected to the
2.1 Sound System must also have an ARC enabled HDMI interface. In combination with
an HDMI ARC enabled television, the sound can thus be sent to the 2.1 Sound System
without an additional audio cable.
50
www.gt-support.de
2.1 Sound System
CUSTOMER SERVICE
00800 - 456 22 000