Establishing A Bluetooth Connection - AudioAffairs CCX 010 Bedienungsanleitung

2.1 Sound System

10. ESTABLISHING A BLUETOOTH CONNECTION

Bluetooth radio technology makes it possible to wirelessly transmit data to devices
equipped with this interface. For example, you can play music files stored on a Blue-
tooth enabled mobile device and play them back through the 2.1 Sound System. The
range between the paired devices can be up to 8 metres.
1. Press the button to turn on the 2.1 Sound System, and also turn on the external
device.
2. On the remote control, press the
3. Activate the Bluetooth connection of the media playback device. The media play-
back device will now search for devices to which it can connect.
4. The media playback device should now receive the device code
AudioAffairsCCX010xxxx.
- Now use the media playback device to connect to the 2.1 Sound System. To do
this, activate the notification AudioAffairsCCX010xxxx on the media playback
device.
5. When the connection is established, two beeps are heard. The word "Connected"
appears on the media playback device, for example. The LED on the 2.1 Sound
System will be lit with a steady blue.
6. Start playback on the Bluetooth media playback device.
The volume can be adjusted from the external device and via the 2.1 Sound System.
Establishing a new Bluetooth connection
If you want to terminate a Bluetooth connection in order to connect a different Blue-
tooth device to the 2.1 Sound System, proceed as follows:
1. Press and hold down the
connection and activate pairing mode. The LED flashes blue.
2. Activate the Bluetooth connection of the other media playback device and pro-
ceed as described above.
CUSTOMER SERVICE
00800 - 456 22 000
Establishing a Bluetooth connection
button. The LED flashes blue.
button for approx. 2 seconds to terminate the existing
www.gt-support.de
57