Service Only; Power Supply; Power Supply Connection - AudioAffairs CCX 010 Bedienungsanleitung

Power supply

7.5

SERVICE ONLY

This USB port is only intended for servicing purposes, and is not suitable for
charging the device.
8. POWER SUPPLY
Inserting/changing the battery of the remote control
DANGER! There is a danger of explosion if the battery is not correctly replaced.
Replace only with the same or an equivalent type.
NOTE: the remote control is supplied with an inserted battery. Pull the plastic strip out
of the remote control before using it for the first time.

Power supply connection

1. Connect all devices before you connect the power supply.
2. Insert the flat end of the mains plug into the connection AC~ on the device.
3. Insert the mains plug into a readily accessible power socket whose voltage
matches the voltage stated on the rating plate. The power socket must still be
easily accessible after connection.
NOTE: to disconnect the device from the mains, pull the mains plug out of the power
socket.
54
www.gt-support.de
1. Remove the battery mount by pressing the
spring on the battery compartment inwards in
the direction of the arrow and pulling it out of
the remote control.
2. Insert the battery (CR2025 3V) or replace the old
battery with a new one. The positive pole (+) of
the battery must point upwards.
3. Push the battery compartment back into the
remote control.
2.1 Sound System
CUSTOMER SERVICE
00800 - 456 22 000