Fm Mode; Fm Reception With Rds Information; Automatic Station Scan - TechniSat DIGITRADIO 216 Bedienungsanleitung

DRC off -
> Confirm by pressing SELECT.

8 FM mode

> Press the MODE button to switch to FM mode.
When switching on for the first time, the frequency 87.5 MHz is set.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
Align the antenna to improve reception (Point 5.3.2).

8.1 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations. Broadcasters with RDS might,
for example, broadcast their station name or the programme type. This is shown on the display. The device
can display the RDS information - RT (Radio text), PS (Station name), PTY (Programme type).
> Briefly press the MENU button to switch between the various information displays
(see also Point 5.4.3).

8.2 Automatic station scan

> Hold down the < or > buttons for longer (2 to 3 sec.), in order to automatically search for the next
station with a sufficient signal.
Compression switched off.
EN
FR
NL
IT
DE
33