Factory Setting; Software Version; Cleaning - TechniSat DIGITRADIO 216 Bedienungsanleitung

10.4 Factory setting

If you change the location of the device, e.g. when moving house, it is possible that the saved stations
can no longer be received. In this case you can reset the device to factory settings to delete all the saved
stations and then launch a new scan.
> Hold down the MENU button, then use the < or > and SELECT buttons to select the Factory Settings
item in the System Settings menu.
> Confirm the query by selecting Yes and pressing SELECT.
All previously stored stations and settings will now be deleted.

10.5 Software version

> Hold down the MENU button, then use the < or > and SELECT buttons to select the Software
Version item in the System Settings menu.
The device software version is now displayed. This may be helpful if you experience problems with the
device. Keep hold of this in case you need to contact the technical hotline.

11 Cleaning

To prevent the risk of an electric shock, you may not clean the device using a wet cloth or under
running water. Remove the mains plug prior to cleaning!
You may not use scouring pads, scouring powder and solvents such as alcohol or petrol.
Do not use any of the following substances: salt water, insecticides, chlorine or acid-based solvents
(ammonium chloride), scouring powder.
EN
FR
NL
IT
DE
41