Storage Procedure - CGM DUAL15000SP Benutzerhandbuch

STORAGE

STORAGE PROCEDURE

1. Drain the fuel tank and carburetor.
a. Unscrew the fuel tank cap, remove the fuel filter, and empty the fuel tank
into an approved gasoline container. We recommend using a
commercially available gasoline hand pump to empty the tank. Do not use
an electric pump. Reinstall the fuel filter and the fuel tank cap.
b. Pull out the carburetor drain tube end under the fan cover of the engine,
and place it in a suitable container.
c. Loosen the carburetor drain screw.
d. Drain the gasoline from the carburetor into the container.
e. Tighten the carburetor drain screw securely.
2. Change the engine oil (refer to page 20).
3. Remove the spark plugs (see page 23).
4. Pour a table spoon (5-10cc) of clean engine oil into each cylinder.
5. Turn the engine for a few seconds by turning the engine switch to the START position to distribute the oil in the cylinders.
6. Reinstall the sparkplugs.
7. Remove the battery and store it in a cool, dry place. Recharge it once a month.
8. Cover the generator to keep out dust.
63