Foam Air Filter Cleaning; Sediment Cupcleaning - CGM DUAL15000SP Benutzerhandbuch

SERVICING YOUR GENERATOR
NOTICE:
Operating the engine without an air filter, or with a damaged air filter, will allow dirt to enter the engine, causing rapid engine
wear.

FOAM AIR FILTER CLEANING

A dirty foam air filter will restrict air flow to the carburetor, reducing engine performance. If you operate the generator in very
dusty areas, clean the foam air filter more frequently than specified in the Maintenance Schedule.
1. Clean the foam air filter in warm soapy water, rinse, and allow to dry thoroughly, or clean in non-flammable solvent and
allow to dry.
2. Dip the foam air filter in clean engine oil, then squeeze out all excess oil. The engine will smoke when started if too much
oil is left in the foam air filter.

SEDIMENT CUPCLEANING

1. Turn the fuel valve lever to the OFF position, then remove the Sediment cup and the O-ring. Discard the O-ring.
2. Wipe dirt from the air cleaner housing and cover using a moist rag. Be careful to prevent dirt from entering the air duct
that leads to the carburetor.
58