Set Pause Time; Program Mode - Axion STIM-X700 Bedienungsanleitung

STIM-PRO X700
cludes the ramp time twice, once for the ramp up and once
for the ramp down
Example: 10s ON time & 3s ramp time =
3s ramp up, 4s full intensity, 3s ramp down

Set pause time

(OFF-Time)
EN
This setting is only available in EMS mode. The Off Time
controls the time of relaxation between two cycles. By
pressing the control, the
relaxation time can be adjust-
ed. Both channels' stimulation
is cycled on and off by the
contraction and relaxation
settings. The range is adjust-
able from 0 to 90 seconds. In Alternate mode, the OFF time
should be equal or more than the ON time.
OFF TIME ≥ ON TIME

Program mode

The programs are chosen by pressing or in program
mode. The programs run with pre-defined settings that can
not be altered (except in intensity).
41