Incidents; Warnings; Errors - Airzone BLUEFACE Benutzerhandbuch

Incidents

In the case of Airzone Blueface and Think thermostats, a warning will appear on the display
screen.

WARNINGS

Anti-freezing. This is displayed if the function is enabled.
Active window. Indicates that the air conditioning has been suspended in the zone due to an
open window. Only available in systems that have enabled the control of windows.
DHW. Domestic hot water activated. If your system integrates DHW management control in
its production unit and this is activated, this message will appear on your Blueface and the air
conditioning in that zone will be suspended.
Low battery. Low battery warning.

ERRORS

In the case of any of the following errors, please contact your installer:
Communication errors
1 Thermostat – Main control board
8
Lite thermostat – Main control board
9 Gateway – Airzone system
10 BACnet gateway – Main control board
11
Gateway – Indoor unit
12 Webserver – Airzone system
13
Control module of radiant elements – Main control board
14 Expansion module – Main control board
15 Consumption meter – Main control board
17
Lutron gateway – Airzone system
C-02 Production control board – Main control board
C-09
Air to water gateway – Production control board
C-11
Air to water gateway – Air to water unit
AC unit error. Anomaly in the AC unit
Purification errors
IAQ1
Loss of communication between the main control board and its bottom side
IAQ2 Loss of communication between the particle sensor and the main control board
IAQ3
Zone module with ionization not connected
IAQ4
Actuator connected directly without ionizer
In the case of Airzone Lite thermostats, if the On/Off icon
communication with the main control board has been lost.
Other errors
5 Open circuit in temperature probe
6
Short circuit in temperature probe
16 Measuring error in consumption meter
blinks rapidly in red, it means
EN
13