Settings Menu - Airzone BLUEFACE Benutzerhandbuch

Settings menu

From this menu you can access the following options:
Mode. If your Airzone Think thermostat is a master thermostat, select the operation mode the
system is using. (See Operation mode section).
Speed. If your Airzone Think thermostat is a master thermostat, select the fan speed the AC
unit is using. (See Fan speed section).
EN
Sleep mode. Sleep mode is an eco-timer for switching off the zone. The selectable values are:
Off. The timer is off.
30. Activates the timer and after 30 minutes, the zone is switched off.
60. Activates the timer. After 30 minutes, the zone changes its temperature by one
degree and 60 minutes after activation, the zone switches off.
90. Activates the timer. After 30 minutes, the zone changes its temperature by one
degree. 60 minutes after activation, the zone changes its temperature by another
degree. 90 minutes after activation, the zone switches off.
Zone navigation (Not available on 3.5.0 or later version). Access the different zones of
your system to modify the set-point temperature, switch the zone on or off and view all the
information about it.
Purification. Use this option to select the purification operation mode:
•
Auto. Purification is activated when the system is in air demand and, in addition, the
Indoor Air Quality (IAQ) measured by the particle sensor is not Good. The zone will
automatically stop purification when the zone has had a Good IAQ measurement for
more than 5 minutes.
•
On. Purification is always on whenever there is air demand.
•
Off. Purification is not activated.
10