Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Assembly Steps - finnlo Endurance TFT Bedienungsanleitung

Inhaltsverzeichnis

Werbung

3. Aufbau
Das Laufband muss genau nach Anleitung aufgebaut werden!
Um den Zusammenbau des Laufbandes für Sie so einfach wie mög-
lich zu gestalten, haben wir die wichtigsten Teile bereits vormon-
tiert. Bevor Sie das Gerät zusammenbauen, sollten Sie bitte diese
Aufbauanleitung sorgfältig lesen und danach Schritt für Schritt, wie
beschrieben, fortfahren.
Packungsinhalt
Entnehmen Sie alle Einzelteile aus der Verpackung und
legen Sie diese nebeneinander auf den Boden.
Achten Sie darauf, dass Sie während des
Zusammenbaus in jede Richtung hin genügend
Bewegungsfreiraum (mind. 2m) haben.
Bevor Sie mit dem Aufbau beginnen, muss das Laufband
Zimmertemperatur erreicht haben.
Um Schäden und Unfälle zu vermeiden, muss das Laufband
zu Zweit aufgebaut werden. Fassen Sie niemals zwischen
Rahmen und Motorgehäuse! Es besteht Quetschgefahr!
3.1 Montageschritte / Assembly steps
Schritt / Step 1

3. Assembly

The treadmill must be assembled according to the instruction
manual!
In order to make assembly of the treadmill as easy as possi-
ble for you, we have preassembled the most important parts.
Before you assemble the equipment, please read these instruc-
tions carefully and then continue step by step as described.
Contents of packaging
Unpack all individual parts and place them on the floor.
Make certain that you have adequate room for move-
ment
(at least 2m) on all sides during assembly.
Before assembling, please make sure, that the treadmill
is having room temperature.
To have a secure assembly, the treadmill has to be assembled
by two persons. Never put your fingers between the main-
frame and the motor cover! Crushing hazard!
04

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

3503111211

Inhaltsverzeichnis