Sage the Puck Sucker SEA503 Bedienungsanleitung Seite 6

Assembly
INSTALLING & REMOVING
THE 9V BATTERY
1. Holding the container on one hand, pull
upwards to remove the lid with the other hand.
2. Using a Philips-head screwdriver, unscrew the
battery cover, found underneath.
3. Carefully set aside the battery cover with
the screw.
6
4. Insert the 9V battery, bottom side up, and align
the male (positive) connector to the side of the
screw lock.
5. Replace the battery cover and screw back
to close.
6. Secure the lid back to the container.