Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-30
Troubleshooting table
Problem
Possible cause
The dish does not
The power or time is set too
get sufficiently
low.
hot.
The dish was very cold
when being placed inside.
Container is unsuitable if
it becomes hotter than the
dish.
The cooking
The dish releases moisture. Not a defect. Simply wipe away any
chamber door
and/or viewing
window steams
up.
Buttons don't
Safety lock is enabled.
respond when
pressed.
Fan continues to
This is a feature of the
run after cooking
appliance's cooling system,
time has finished.
and does not signify a
defect.
Solutions, tips
Heat the dish for a little more time in the
appliance.
Use a suitable container.
moisture after operation.
Press and hold the "Pause/Stop"
button (12) for 3 seconds (see also the
chapter "Safety lock" on page EN-14).
No measures required. The fan will
automatically switch off after no more than
3 minutes.
Werbung
Inhaltsverzeichnis
