eta Freshie III Bedienungsanleitung Seite 23

1) Button for food with higher moisture B4
Intended for vacuum packing and sealing of foods with higher moisture. Press this button
to remove the air and then seal the bag. Place the bag as indicated in Fig. 3B.
2) B2 button for external vacuum-packing
Intended for removing air from the sealing box and compatible special bags using air
extracting hose (ETA076290020). When the button is activated, air is removed from the
vacuum-packing box/bag.
Insert thin connector to the device and attach wide and rounded adapter to the air extracting
port of the box or compatible bag. When this function has been activated, the round adapter
will be sucked tight. When switched off, remove the hose (from the vacuum-packing box
first).
Caution
– The correct function of the appliance is guaranteed only if you use the vacuum-packing
boxes/bags supplied by the manufacturer. Request it from your distributor.
– For correct function (i.e. generating vacuum), lid A1 must be closed tightly.
– When removing food from the vacuum-packing box, make sure to release the vacuum
first by pressing down the valve in the middle of the cover.
3) Vacuum-packing + sealing + cancel (B3 button)
When this feature is activated, the vacuum sealer will remove air from the vacuum bag first
(extraction area) and then produce a strong, seamless seal. Place the bag as indicated
in Fig. 3B.
INTERRUPTION
Press this button (B3) to interrupt any activated function.
4) Button PULSE for controlled air removal B5
Press and hold this button to activate and maintain the air removal function (either using
external air removing button or standard bag sealing function). In this way, you can control
the air removing intensity. If removing air from the bag, you can release the button after
having reached required vacuum, and then activate heat sealing function (button B6) and
seal the bag.
This function is intended for more sensitive food, allowing you to control the air removing
intensity by yourselves.
5) B6 sealing button
When activated, the vacuum sealer will produce a strong, seamless seal. Place the bag
as indicated in Fig. 3A.
– If sealing function is activated, air is exhausted for a short time.
Note
23 / 47
EN