Scope Of Delivery; Technical Data; Correct Use; Safety Notes - FLORABEST AG-1780 Gebrauchsanweisung

Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following operating
instructions.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.

Scope of delivery

1 x Tabletop (1)
2 x Table frame, long side (2)
1 x Table frame, short side (3)
1 x Table frame with high adjustment device
on the short side (4)
2 x Strut (5)
16 x Screw/washer/cover cap (6)
1 x Allen key (7)
18 x Silicone cap (8)
1 x Instructions for use

Technical data

Weight: approx. 22.7kg
Size: 150 x 96 x 71cm (L x B x H)
Legs: 70 x 2 x 5cm (H x B x T)
Frame: 5 x 2cm
max.
Maximum load capacity: 25 kg
25
KG

Correct use

The article is not intended for commercial use.
The article was designed for use in living areas,
e.g. balcony, terrace or garden.

Safety notes

Danger to life!

• Never leave children unattended with the
packaging material. There is a risk of
suffocation.
6 GB/IE/NI

Risk of injury!

• Ensure the article is stable before use.
• Place the article on a level surface.
• The article may only be used under adult
supervision and may not be used as a toy.
• Inspect the article for damage or wear before
each use.
• Never stand or sit on the table.

Avoid damage to property!

• Secure the article during extreme weather
conditions, e.g. in strong winds.
Store the article in a sheltered room.

Assembly instructions

1. Place the tabletop (1) on a soft, flat surface
during assembly (caution: hard surfaces may
scratch the tabletop).
2. Connect the long frame section (2) of the
table frame to the short frame section (3/4)
(as illustrated). Now take 4 screws (6) and
screw them into the holes using the Allen key
(7). Secure the screws with the washers and
cover caps, as shown in figures B and C.
3. Repeat this process on the opposite side of the
table.
4. Place the two struts (5) on the table frame and
connect these using 4 screws each.
5. Place the 18 silicone caps (8) into the
matching holes on the table frame.
6. Carefully lay the tabletop on the table frame.
7. Adjust the height of the table by using the leg
with adjustable height for maximum stability.

Cleaning and maintenance

Care notes

Clean the article with a damp cloth and a mild
cleaning agent.

Storage

We recommend storing the article in a clean,
dry, temperature-controlled place when not in
use in order to enjoy the article for as long as
possible.