Rollei HS Freeze 1S Anleitung Seite 33

Function Description
Lithium battery charging
1 . Press the battery release key and
remove the battery .
2 . Place the battery on the charging
station .
3 . When the power cable is connec-
ted to the mains power supply, the
red light indicates that the char-
ging is in progress, and the green
light indicates that the battery is
fully charged .
Warning! Please do not continuously flash
with full power for a long time, otherwise it
will cause the HS Freeze 1s to overheat or age .
Description of continuous flash shooting
The temperature of the flash head may increase when the flash is continuously fired
at full power for a short period of time . To avoid deterioration or damage of the
head due to overheating, the HS Freeze 1s will automatically activate the overheat
protection and limit the recycling time . During the limited period, the "OH"
overheat symbol is displayed, and the recycling time is automatically set to about 3
seconds (yellow "OH") and about 5 seconds (red "OH") .
Firmware update
1 . Connect the flash to the computer using the supplied USB-C cable .
2 . Once the flash appears on the computer, copy the firmware to it .
3 . Remove the cable when the copying process is complete .
33