Troubleshooting Table - hanseatic HAP35060WKC Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not necessarily mean there is a
defect in the appliance. For this reason, check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
■ Never try to repair the appliance yourself. You can put your own and future users'
lives in danger. Only authorised specialists are allowed to carry out this repair work.
Problem Possible cause
Power button (9) is not
pressed.
Mains plug is loose.
Appliance is not
working.
The socket is defective.
The motor is defective.
Appliance is poorly positioned
or air exchange is obstructed.
No purification Filters have not been cleaned/
effect, odours are replaced for a long time.
not adequately
The (new) filter is still in the
removed. packaging film.
The appliance is placed in
The air quality
a position where the sensor
indicator does not
cannot adequately measure
change.
the air quality.
The Filter Change No reset was performed.
Reminder LED (2)
does not go out
after changing the
filter.
Troubleshooting table
Solutions, tips
Switch the appliance on.
Check that the mains plug is firmly
inserted into the socket.
Try the appliance with a different socket.
Check fuses and/or circuit breakers.
Contact our service department (see
"Service" on page EN-16).
Find another location or remove
obstacles.
Clean or replace filter (see "Care and
maintenance" on page EN-13).
Remove the filter and remove the
packaging film. Then insert the filter
again (see "Remove filter packing" on
page EN-10).
Select another location.
Carry out a reset after a filter change
(see page EN-12).
Page EN-15