Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-10
Getting started
Getting started
Suitable location
– The appliance is designed for a maximum
space size of 42 m
.
2
– Place the appliance on a level floor, table
or similar. Make sure that it is not at an an-
gle and cannot be knocked over or against.
Failure to do so may result in errors.
– Distance from the walls and above should
ideally be at least 30 cm.
– The appliance should be at least 2 metres
away from appliances that emit electro-
magnetic waves (e.g. TV and radio sets,
Wi-Fi routers, cordless telephones, etc.).
Otherwise, there may be interference.
– Do not operate the appliance near gas-pow-
ered appliances, heaters or open fires.
– Do not place the appliance directly under
air conditioning units in order to prevent
condensation from dripping onto the appli-
ance.
– Do not operate the appliance in rooms with
large temperature fluctuations, as this can
lead to condensation inside the appliance.
– Only select locations that are not exposed
to direct sunlight.
– We recommend regularly changing the
position of the appliance. Otherwise, the
walls and floor around the appliance may
become stained.
Before you begin
• Read the chapter "Safety" from
page EN-4.
Remove filter packing
1. Tip the filter cover (6) forwards and then
pull it out upwards.
2. Remove the H13 filter (7).
3. Remove the Activated Carbon filter (8).
4. Remove the packaging film from both fil-
ters and put them back in.
5. Insert the filter cover (6) at the bottom and
fold it closed.
6. Insert the mains plug in an easily accessi-
ble socket.
You will hear a beep and all LEDs will light
up twice. The appliance is now in standby.
(6)
(7)
(8)
Werbung
Inhaltsverzeichnis
