Getting Started - Getac F110 Serie Bedienungsanleitung

Getting Started

Unpacking
For standard models only:
F110 Tablet PC
AC adapter AC power cord
Stylus
Battery pack x 2
Tether
Document(s) Driver disc (optional)
Installing the Battery Packs
The Tablet PC has two battery compartments
for two battery packs; each is installed in the
same way.
1. With the battery pack correctly oriented,
attach its connector side to the battery
compartment at an angle (
press down the other side (
2. Slide the battery latch toward the locked
position ( ).
CAUTION: Make sure the battery latch is correctly
locked, not revealing the underneath red part.
Installing the Micro-SIM Card
(Optional)
1. Locate the micro-SIM card slot. Slide the
protective cover to the unlocked position
and open the cover.
2. Remove one screw to detach the small metal
plate that covers the micro-SIM card slot.
3. Noting the orientation, insert the micro-
SIM card all the way into the slot.
Connecting to AC Power and
Starting Up

) and then

).
You must use AC power when starting up
the Tablet PC for the very first time.
1. Connect the AC adapter as shown
below.
2. Press the power button (
3. The operating system, Windows, should
start.
When turning on your Tablet PC for the
very first time, you will be guided through
a setup process. Follow the onscreen
instructions to complete.
NOTE: Do not expose your skin to the Tablet PC
when operating it in a very hot or cold environ-
ment.
) to start up.
1