Getting Started - Getac F110 Bedienungsanleitung

Getting Started

Unpacking
For standard models only:
F110 Tablet PC
AC adapter
Battery pack x 2
Driver disc
Document(s)
Installing the SIM Card (Optional)
and Battery Packs
1. Slide the two small locks outward to the
unlocked position (
release the latch (
battery cover.
2. Select models only: With the SIM card's
chip side facing up and the beveled corner
pointing to the slot, insert the card all the
way into the slot.
3. Note the orientation of the battery pack.
Hold the battery pack at an angle and
insert its small tabs to the corresponding
notches in the battery compartment.
AC power cord
Screen cleaning cloth
Stylus
Tether

) ( ) and then

) ( ) to open the
Then, lift the yellow protection sheet in
the battery compartment and plug the
battery connector.
4. Proceed with the other battery pack.
5. Hold the battery cover at an angle and
insert the cover's small tabs to the corre-
sponding notches on the Tablet PC; then
close the cover. Press the four small dots

( ) so that the cover clicks into place.
Engage the cover latch (
the two small locks inward to the locked

position ( ) ( ).
Connecting to AC Power and
Starting Up
The first time you use your Tablet PC, use the
AC adapter.
1. Plug the DC cord of the AC adapter to the
power connector of the Tablet PC (
2. Plug the female end of the AC power cord
to the AC adapter and the male end to an

electrical outlet (
3. Press the power button (

) ( ) and slide

).
).
) to start up.
1