Technical Data - AER Compact Classic pro Bedienungsanleitung

Compact Classic
pro

9. Technical data

INPUTS
Input 1 Combined XLR/jack socket
Line: 56 mV, 2.2 MHz, unbalanced, swit-
chable 9 V phantom power on ring
(max. 40 mA)
Mic: 1.5 mV, 1200 Hz balanced, 4 khz
unbalanced, voice filter 300 Hz,
switchable 48 V phantom power
through 2x 6.8 khz
Piezo: 14 mV, 2.2 Mhz unbalanced,
switchable 9 V phantom power on ring
(max. 40 mA)
Piezo/Mic blender mode:
• Piezo 15 mV, 2.2 Mhz, unbalanced, on
jack/tip or XLR/pin 2.
Uses input 2 internally.
Input 2 socket disabled.
• Mic 3 mV, 660 Hz, unbalanced, 5 V
phantom power through 680 Hz,
on jack/ring or XLR/pin 3.
Input 2 Jack socket, unbalanced
Line: 30 mV, 90 khz
Piezo: 15 mV, 2.2 Mhz
Clip indicator Headroom 15 dB
Attack time 4 ms
Aux in Stereo cinch (RCA) sockets,
2x 71 mV, 22 khz
Effect return Jack, 210 mV, 24 khz
OUTPUTS
Phones Jack, stereo (left and right connected),
max. 20 V RMS, 470 Hz, max. 2x 100
Mhz. Does not work with mono plugs!
Tuner Jack, 170 mV, 100 Hz
Insert
(In-/Output) Jack, stereo, 750 mhz, 50 Hz
tip = send
Ring = return
sleeve = ground
Line out Jack, 750 mV, 100 Hz
Left/right out Jack, 750 mV, 50 Hz
Normally connected line out, prepared
for internal expansion modules
Effect send Jack, max. 340 mV (depending on
'pan' setting), 50 ž
DI out XLR socket, balanced, adjustable
55-280 mV, 200 Hz; switchable pre/post
effects and equalizer
-11-
FOOTSWITCH CONNECTORS
fs effect Jack, stereo
tip = built in effect
ring = external effect
sleeve = common
fs mute Jack, stereo
tip = mute input 1
ring = mute input 2
sleeve = common
EQ Bass ±14 dB /60–400 Hz
narrow Q = 3
wide Q = 1
Middle ±6 dB / 800 Hz
Treble ±10 dB / 10 kHz
Analog signal
processing Limiter, subsonic filter, fixed equalizer
Built-in effects 32-bit AER effects processor, 16 presets
Power amp Monolithic I.C., 60 W / 4 ž
Limiter threshold 50 W
Speaker system 2-way with crossover
8" (20 cm) twin-cone fullrange speaker
(96 dB / 1 W / 1 m) 1" (25 mm) dome
tweeter
Mains power AC 115/230 V (switchable), 50–60 Hz,
max. 140 W
Mains fuse slow 2 A
Cabinet 15 mm (0.59") birch plywood
Finish waterbased acrylic, black spatter finish
Dimensions 330 x 260 x 235 mm
(13" x 10.24" x 9.25") W x H x D
Weight 7.8 kg (17 lbs)
Notes
Input and output voltages refer to 1 kHz sine-wave test signal.
Input levels refer to 50 Watts / 4 Ohms output power.
Output levels refer to 100 mV at input 1, line mode.
Impedance values for inputs and outputs are inner impedances
(not source or load impedances, except for power amp).
Specifications and appearance subject to change without
notice.
B
Audio Electric Research GmbH
www.aer-amps.com