Starting Up And Functions - SHX SHX22HEAT100 Bedienungsanleitung

1. Remove the appliance from the packaging and remove all packaging materials.
2. Check the appliance for possible damage.
3. Attach the feet as follows:
•
Carefully turn the appliance upside down.
•
Attach the feet using
the screws provided.
4. Turn the convector heater back upright and place it on a stable, level surface where it will not tip
over and which is not heat-sensitive. Next, connect the appliance to the power supply.
5. Before operating the appliance, check that the main switch is switched off.
6. Now insert the power plug into a suitable outlet socket.
Main switch
- Put the main switch to ON. It lights up to indicate that the appliance has power.
- A beep will sound and the appliance will switch to standby mode.
-

Starting up and functions

172