Mounting The Control Unit - AFRISO EURO-INDEX TankControl 10 Betriebsanleitung

5 Mounting
INOPERABLE PRODUCT
• Verify that the transparent hose of the pressure sensor is not closed or bent.
Failure to follow these instructions can result in equipment damage.
5.1

Mounting the control unit

 Select a mounting position where the audible alarm signal can always be
heard, even in the case of ambient noise. If audibility cannot be ensured,
you must install an additional alarm unit at a suitable location.
 Verify that the control unit is mounted to an even, rigid and dry wall at eye
level.
 Verify that the control unit is accessible and easy to oversee at all times.
 Verify that the control unit is protected against water and splash water.
 Verify that the control unit is protected from direct sunlight.
 Verify that the the moisture-proof junction box is closed in such a way that
it is water-tight.
 Verify that the moisture-proof junction box is closed in such a way that it
is not air-tight.
Mounting
NOTICE
TankControl 10
EN E N
17