Niceboy VEGA X 8K Bedienungsanleitung Seite 24

Recommendation: regularly format the memory card on a PC to avoid video writing errors. For more informa-
tion about using or formatting memory cards, contact the manufacturer of the SD card.
BATTERY/CHARGING
To insert or remove the battery, open the cover on the camera's underside (press the button on the
cover and extend the cover). Charge the camera by connecting the enclosed USB cable to the USB port
() on the left side of the camera and connecting the other end to a charging adapter, e.g. from a mobile
phone (5 V voltage and minimum current of 1 A). The camera can also be charged by connecting the USB
cable to a PC or a power bank.
Attention: fully charge the battery before first use. Do not subject the camera to large temperature swings. Keep
the battery and camera under watch during charging. Charge time is dependent on the output current of the
charging adapter.
CONNECTING THE CAMERA TO A PHONE VIA WI-FI
Install YUTUPRO (for free) onto your phone (available in the AppStore for iOS and Google Play for An-
droid). Do not start the application right after installing it and follow these instructions:
1. Turn the Wi-Fi in the camera on
2 Open the Wi-Fi settings on your mobile phone and connect to the camera's network (login: Niceboy,
password: 12345678).
3 Once connected to the camera's network via your mobile phone, launch the application and start
controlling the camera from your phone.
Attention: Before using the application, enable all the permissions for the application in the phone's settings,
turn off "data connection" on the phone and leave only Wi-Fi turned on. The application is compatible with
mobile phones with iOS 9.0 and later or with Android 8.0 and later.
24