Steinberg Systems SBS-MD-20 Bedienungsanleitung Seite 32

6. False signals can be caused by contaminated ground, electrical interference, or
large irregular pieces of metal.
False signals are usually intermittent or not repeated.
FACTORS AFFECTING OBJECT DETECTION:
It is difficult to obtain an accurate detection result. Factors that affect the quality of
readings are:
• the angle of the target buried in the ground,
the depth at which the target is located,
•
the degree of oxidation of the target,
•
the size of the target,
•
• electro-magnetic and electrical interference surrounding the target,
measurements in the area of strongly mineralized soil, fertile ground or wet
•
sand - the detector will emit sound even if there is no metal in it. In this case
you can reduce the sensitivity. You can also increase the distance between the
probe and the ground,
• metal digging tools placed near the unit.
TABLE OF METALS, TARGET IDENTIFIERS:
iron
Target
iron
objects
Tone Low
Icon
Reading
10-40
value
CAUTION!
cannot be uniquely identified until it is unearthed. The table is for general reference
only.
5¢
aluminum,
aluminum,
some small
nickel,
gold items,
small gold
objects
Low
41-50
There is a wide variety of metals. The target detected by the unit
ZN, 1¢, S-
P-Tab
CAPS
zinc,
aluminum,
medium-
sized gold
can pull
objects,
tabs,
bottle tops,
Medium Medium
55-70 72-75
10¢ 25¢
zinc,
aluminum,
large gold silver,
objects, aluminum
copper
coins
High High
80-83 86-88