Steinberg Systems SBS-MD-20 Bedienungsanleitung Seite 28

2. After approximately 2 seconds, the unit will go into standby mode. The LCD
will display the four modes of operation, the SENS indicator, and the battery
level.
3. A unit left in standby mode for approximately 15 minutes (i.e., no button is
pressed, or no target is detected) will automatically turn off.
TESTING
1. Testing the unit before using it for the first time both indoors and outdoors is
recommended.
2. Note how the detector reacts to individual metals.
OPERATING THE UNIT INDOORS
1. Press the POWER button to turn on the unit.
2. Set the desired operating mode:
A. A-M (ALL METAL) mode:
a) Press the MODE button to select A-M (ALL METAL) mode. A-M will
appear on the LCD display.
b) This mode is designed to detect all types of metals.
B. DISC (DISCRIMINATION) mode:
a) Press the MODE button to select DISC mode. DISC will appear on the
LCD.
b) Press "+" to eliminate detection of unwanted targets. The icons of
eliminated targets will disappear from the LCD screen in order from left
to right.