Steinberg Systems SBS-MD-20 Bedienungsanleitung Seite 24

1. LCD display board
2. POWER button: switching the unit on/off
3. MODE button: Selection of one of the four modes (selection is shown on the
display)
4. + button: Increase the volume of the VOLUME function, the sensitivity of the
SENS function and the discrimination range of the DISC function.
5. PP button: Precise search mode, shows the precise location of the target.
6. - Button: Decrease the volume, sensitivity and discrimination range of
VOLUME, SENS and DISC.
7. 3.5mm headphone input.
8. SENS button: adjusts sensitivity level for object search. Press SENS button,
then press + or - button to increase or decrease sensitivity. The sensitivity level
will be displayed on the LCD.
9. VOLUME/BACKLIGHT button - adjust volume/enable backlight: short press to
adjust volume level. To turn on the backlight, hold the button down for about
2 seconds. A long press again turns off the backlight.
Caution: Since the backlight consumes more power, it is better to turn it off in
bright areas.
Display: