Installation Instructions; Removal Of Packaging; Positioning And Levelling - Fagor C-G920 Installations-, Gebrauchs- Und Wartungsanleitung

1. Chimney
2. Diffuser/Hotplate
3. Control holder
4. Gas valveAdjustable leg
5. Oven door
SAFETY DEVICES
The ignition pilot lights have a thermocouple which disconnects the gas supply if the flame goes out.
ACCESSORIES SUPPLIED
A hook for lifting the hotplates is supplied with the oven or hotplate to remove the hotplate guide ring or the cover
of the pilot light at the base of the oven.
ACCESSORIES ON ORDER
Fagor Industrial offers the following accessory for the cooker (not supplied with the equipment) which is available on
order:
• CODE: Hotplate KIT.
• CODE: Water tap KIT.

4. INSTALLATION INSTRUCTIONS

The positioning and installation, and all repairs or modifications, should always
be carried out by an AUTHORISED TECHNICIAN, in accordance with the
applicable legislation of the country.
The installation, incorrect adjustment, inappropriate maintenance or use of the
appliance may cause material damages and injuries.
4.1

Removal of packaging

Remove packaging from the machine and check for damage during transportation. If any damage is
observed, immediately notify the supplier and the transport company. In the event of doubt, do not use
the machine until the problem has been assessed.
Packaging (plastic, wood, staples, etc.) must not be left in the reach of children, it is a
potential hazard.
The machine should be moved using a fork-lift truck or similar to avoid damage to the structure. Transport
the machine to the installation location and then remove packaging.
All the packaging can be recycled. Dispose of packaging correctly.
4.2

Positioning and levelling

The cookers without oven are designed to be placed on top of a low unit or hanging- or bridge-type
structure.
The cookers with oven have adjustable legs to ensure that they are always correctly mounted. Just
rotate the legs until the required height. The flooring on which the machine is to be installed must be
able to bear the full weight of the machine.
For optimum operation, it is essential that the appliances are correctly levelled.
It is advisable to install an extraction hood for the optimum operation of the appliance.
44