ENVIRONMENT OF USE -------------------------------------------------------------------------------------------------------------------
• DO NOT use the appliance in extremely humid or dusty places, as this may lead to malfunction or electric shock.
• DO NOT place the appliance near heaters, radiators or in direct sunlight.
• Place the appliance on an even, non-slip surface.
• Keep the product away from pets and children.
• The product is for home use, not commercial use.
Please stop use, switch off and unplug the device if any of the following occurs:
• If a major component is damaged or an unusual noise is heard from the inside.
• If you experience unusual physical pain while using the product.
• If you experience any unusual sensation of discomfort when using the product.
If you experience unusual sensations of discomfort when using the product.
PHENOMENON
Does not start
The device makes a ringing
and banging sound
The remote control does
not work
The device stops working
Does not work properly
• If the malfunction is not solved by the methods described above, please contact the manufacturer or distributor.
Do not attempt to disassemble or repair the appliance yourself.
GENERAL REASON
- The power cable is not plugged in properly
- Not switched on
- Fuse blown due to sudden surge in current
- This is a normal operating sound, not a
malfunction sound
- Battery dead
- The distance is too great
- The set time has expired
- A command may have been issued too often
PROCEDURE
- Plug in the power cable
- Switch on. The indicator light
will come on
- Replace the fuse with a new one
- You do not need to do anything
- Replace the battery
- The infrared detection
distance is 2.5 m
- Start again in 10 minute intervals
- Switch off and switch on again