Rimage Producer III™ and Producer IIIN™ User Guide
Install or Remove the Printer Access Cover
You may need to remove the printer access cover to service the printer. This section provides instructions to install or
remove the printer access cover.
Installing the Printer Access Cover
1.
With the printer access door in the open
position, place the printer access cover on
the Producer III as shown.
2.
Slide the printer access cover toward the front of the Producer III, ensuring that the tabs on the
printer access cover slide into the slots on the Producer III frame.
3.
Close the printer access door.
4.
At the back of the Producer III, turn the
thumbscrew clockwise to secure the printer
access cover.
14
Printer
Access
Cover
Producer III
Printer
Access
Door
Thumbscrew
2000538_A