Powering Off The Producer Iii Autoloader; Pausing The Producer Iii Autoloader - Rimage Producer 7100N Benutzerhandbuch

Powering Off the Producer III Autoloader

1. Close all open applications.
If you have a Producer 7100 or 8100, continue with
step 3.
2. Briefly press the PC power button. This shuts down
the software, Windows, and the embedded PC.
Caution: Do not press and hold the PC power
button. If you press and hold the PC power button,
the embedded PC will not shut down properly.
This may cause data loss or corruption.
Note: Power off takes approximately 30 seconds.
3. After waiting approximately 30 seconds for the PC to
power off, press the main power switch to power off
the Producer IIIN.

Pausing the Producer III Autoloader

Pause the Producer III autoloader to add discs to the autoloader or change print ribbons.
1. Open the front door. The operation pauses.
2. Close the front door. The operation resumes.
2000538_A
Operate the Producer III Autoloader
PC Power Button
Power Switch
9