Introduction; Important Information - Rimage Producer 7100N Benutzerhandbuch

Introduction

This manual provides the information needed to operate the Producer III and the Producer IIIN autoloaders. These
products are part of the Rimage Producer III family of products and include the 7100, 7100N, 8100, and 8100N
autoloaders. The term 'Producer III' is used throughout this document to refer to the Producer 7100, 7100N, 8100,
and 8100N autoloaders.
To set up and install your Producer III autoloader, refer to the Setup and Installation Guide included with your
product.
The Producer III autoloaders are available with either the Everest™ printer or the PrismPlus!™ printer. For
information about your printer, refer to the Setup and Installation Guide or User Guide that shipped with your printer.
The Producer 7100N and Producer 8100N have an embedded control center (PC). The embedded PC is a network-
ready device that receives orders from other networked computers. You can also operate the Producer 7100N and
Producer 8100N by attaching a monitor, keyboard, and mouse.

Important Information

US, Asia/Pacific, Mexico/Latin America
Rimage Corporation
7725 Washington Avenue South
Minneapolis, MN 55439
USA
Attn: Rimage Services
Contact Rimage Services:
www.rimage.com/support.html
Email: http://www.rimage.com/support_form.cfm
Tel:
North America: 800-553-8312
Asia/Pacific, Mexico/ Latin America: 952-946-0004
Fax: 952-946-6956
When you contact Rimage Services, please provide:
Unit serial number and software version.
Functional and technical description of the problem.
Exact error message received.
2000538_A
Europe
Rimage Europe GmbH
Albert-Einstein-Str. 26
63128 Dietzenbach Germany
Contact Rimage Services Europe:
www.rimage.com/support.html
Email: support@rimage.de
Tel: +49-(0) 6074-8521-0
Fax: +49-(0) 6074-8521-21
My Rimage Product Information:
Copy this information from your Rimage Product for
future reference.
Serial Number:
Product Name:
Date of Purchase:
Introduction
1