Identify The Parts Of The Producer Iii Autoloader; Front View - Rimage Producer 7100N Benutzerhandbuch

Rimage Producer III™ and Producer IIIN™ User Guide

Identify the parts of the Producer III autoloader

Front View

Operator Button
Operator Panel
Output Bin
(8100 and 8100N only)
PC Power Button
(Producer IIIN only)
Status Light
The Producer III can be equipped with an optional status light that indicates various conditions. The table on the next
page shows status light states and explains the conditions indicated by each state.
Operator Panel
The operator panel has a two-line display that informs you of operations or conditions that require operator
intervention. This includes the consumable status. After initialization, the Producer IIIN displays the name of the
embedded PC. Refer to the Gemini Utilities section on page 16 to see other options.
Note: The caret symbol '^' in the upper right corner of the display indicates that the Rimage software is currently
communicating with the autoloader.
Operator Button
To access the operator button, open the front door. Press the operator button to rotate the carousel and position a bin
so that discs can be loaded or unloaded. Each time you press the operator button, the carousel rotates to the next
bin.
Tip: The carousel will rotate to a bin only after the autoloader has completed initializing.
Disc Dispenser
Only the 8100 and 8100N have the disc dispenser.
Beeper
The Producer III autoloader has a beeper that sounds when user intervention is required. Read the condition on the
operator panel or at the client application and take appropriate action to correct the problem.
6
Carousel
Status Light
(Optional)
Lift Arm
Recorders
Front Door
2000538_A