LD Systems MAILA SPA Bedienungsanleitung Seite 9

Mount the amplifier module on the distance pole: Plug the amplifier module in the desired beam direc-
tion from above onto the LD MAILA DB distance pole already mounted on the subwoofer. Unintentional
twisting of the amplifier module is prevented by a tongue and groove principle.
To mount the optionally available EasyMount+ flight bracket on the amplifier module, insert all three
steel hooks of the flight bracket into the corresponding holding sockets of the amplifier module. Now
slide the entire flight bracket towards the back of the case. When mounting the flight bar, make sure
that the two spring-loaded safety lock bolts snap completely into the safety holes provided for this
purpose. Check the correct functioning of the locking bolts before each installation. To loosen the
connection, both locking bolts must be pulled upwards at the same time for safety reasons (two-hand
unlocking).
Click
Amplifier module LD MAILA SPA: The optimal hanging point for truss mounting is displayed after entering
the corresponding data in the SPLAY ANGLES menu item under PICK. On the retaining rail of the flight
bar there are corresponding markings.
Set up the displayed suspension point before mounting the flight bracket with amplifier module
on a traverse.
9