LD Systems MAILA SPA Bedienungsanleitung Seite 16

ROTATION
To set the rotation of the display display, select ROTATION confirm, then select the desired status and
confirm the selection.
In order to enable the automatic calculation of the optimal spreading angles of the satellites
and the optimal suspension point of the EasyMount flight bracket (for truss mounting), the
rotation of the display display must correspond to the mounting type.
• Mounting on distance pole: ROTATION standing
• Truss mounting (180° rotation): ROTATION flying
SETTINGS
To access the System Preferences menu, select SETTINGS and confirm the selection. Then select the
desired submenu item and confirm the selection.
SYSTEM STATE DISPLAY OF SYSTEM STATUSES
PIN LOCK
* * * * 
code to LOCK
BLUETOOTH
OFF
ON
DISPLAY
Brightness
Screensaver
16
0.0
ms
4
Sat
0.0 ms
4 Sat
0.0 ms
4 Sat
0.0 ms
4 Sat
0.0 ms
4 Sat
0.0 ms
4 Sat
0.0
ms
4
Sat
0.0 ms
4 Sat
Protect the amplifier module from accidental and unauthorized
operation by activating the lock function.
Enter PIN
Enter a 4-digit PIN and confirm the entry.
Access can now only take place after entering the PIN.
Reset PIN: Press and hold the encoder when powering on.
Bluetooth disabled.
Bluetooth enabled, allows access to the system via tablet app.
Adjust the display brightness from 10% to 100%.
active
inactive
ROTATION standing standing upright
flying
Deactivation of the display illumination after about 1
minute without input via rotary push encoder.
Display lighting permanently on.
Truss assembly