Two-way valves, types 204, 205 pneumatically actuated with rotary drive
E
Replacing Parts
5.1 Drive unit
Replacement example of Symmetrical two-way valve Type 204
Dismantling:
Loosen the hexagonal nuts (1) and remove them with the spacing washers (2)
Pull the drive unit (3) out of the ISO bush (8).
Dismantle the bearing bush (4) and them remove the bearing (5).
Pull the radial shaft sealing ring (6) carefully out of the ISO bush (8) with a
screwdriver.
When exchanging the drive unit (3): Unscrew the threaded pin (7) out of the drive
unit.
Assembly:
Proceed with the assembly works in reverse sequence (dismantling).
18