Qualification Of People; Representation Of Warning Information - KMH Design 204 Betriebsanleitung

1.3 Qualification of People

Activities
Planning and
designing
Transport and storage
Working on pipework
systems and
pneumatic drive units
Troubleshooting and
repair works
Working on electrical
equipment

1.4 Representation of warning information

Warnings of personal injury are marked according to DIN EN 82079-1.
Warning signs and
signal words
DANGER
WARNING
CAUTION
Warnings of material damage are marked with the signal word ATTENTION.
Two-way valves, types 204, 205 pneumatically actuated with rotary drive
People Knowledge
Planner, Designing pipework systems
operator Hygiene requirements
Measures for securing loads
Personnel for
Safe handling for lifting equipment and lifting
transport and
gear
storage
Refer to Chapter 1.7 "Transport and Storage"
Laying, fixing and connections for pipework
Connections for pneumatic drive units
Skilled
Fundamental principles for pneumatic systems
workers
and units e.g. pressure storage units
Evaluating the wear status as well as dismantling
and assembling components
Laying electrical cables
Electrician Connections for electrical equipment
Connections and interfaces in control electronics
Meaning
A hazard with a high degree of risk which, if not prevented, will result in
death or a serious injury
A hazard with a medium degree of risk which, if not prevented, could
result in death or a serious injury
A hazard with a low degree of risk which, if not prevented, could result
in a minor or moderate injury
E
Safety
5