Energy Saving; Sleep Mode - clage Zip HydroTap G5 CS 100 Gebrauchsanleitung

LCD Screen Operation - Section D
D

Energy Saving

Note: For the best possible water hygiene, it is recommended to
leave the heating and cooling of the unit permanently active.
I. Sleep Mode
SLEEP WHEN
It gets
dark
The "darkness" option only works on taps with a light sensor (Classic,
Classic Plus). It is recommended to calibrate the light sensor.
Switch off system: Water cooling and water heating are deactivated.
The water temperature adjusts to the room temperature.
Note: The unit needs a few minutes to heat/cool the water to the
setpoint again when the sleep mode is interrupted.
12:12 PM
Not used
in 2 hours
Diff erent sleep modes can be
selected, the operating times can
be set and the previous energy
consumption can be viewed.
When the function is active, the
water temperature control is re-
duced or switched off completely.
Each tapping during the sleep
mode activates the unit. However,
a few minutes are needed to bring
the water back to the setpoint.
Sleep when...
Choose: in it gets dark, not used
in 2 hours or both.
When Sleeping
Set the actions for your HydroTap
during the sleep mode.
31