clage Zip HydroTap G5 CS 100 Gebrauchsanleitung Seite 23

Arc tap
Select the desired type of water by tipping to
on the Select button on the Zip lever at the
tap.
> Blue: chilled water
> White: sparkling water
Turn the lever to dispense water. When the
lever is turned back, water will flow as long
as the lever is held. If the lever is turned
forwards, water will flow continually for 5 to
15 seconds. This time can be set in the menu.
The lever then has to be manually returned to
the Off position.
Tap LEDs (Touch-Free excluded)
Blue Chilled Water LED
On all the time
This indicates that the chilled water is ready.
Flashing slowly
This indicates that the temperature of chilled water is not within the
set range.
When the chilled water is at the set temperature, the light will stop
flashing. This could take several minutes.
During heavy usage, the temperature can rise out of this range.
White Filter LED (Classic only)
White filter LED off
This indicates the filter is operating with-
in its normal specified lifespan.
White filter LED flashing slowly
The light will flash slowly when the filter
is due for replacement and the LCD will
show "Filter Change". Refer to chapter
"Replacing the filter".
Note: For the taps Arc the need for a
filter replacement is indicated by cyclically
flashing all the LEDs in all colours.
Tap Operation
23
Zip lever
SELECT
SAFETY
White filter LED